EPDM Insulation
Aerocel® EPDM Tube and Sheet lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 3/8", 1/2", 3/4", 1" 1-1/4", 1-1/2" and 2" wall in popular I.D. sizes from 1/4" ID up to 16" ID. The closed-cell structure of Aerocel® Pipe lnsulation makes it the mostefficient elastomeric insulation.
Aerocel® EPDM is manufactured to consistently provide tested values - not theoretical calculations - on these key performance criteria for mechanical system insulation:
Thermal Conductivity: 0.245
Water Vapor transmission: 0.03
Fire Rating: Will not contribute significantly to fire (simulated end-use testing).
Aerocel® Pipe lnsulation in 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" thicknesses has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 "Surface Burning Characteristics of Building Materials."
Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified.
Key Features
- UV Resistant
- Low thermal conductivity
- Easy to install
- 25/50 rated through 2" wall
- Versatile for heating, AC, refrigeration and plumbing
- EPDM Rubber
- Moisture Resistant
Everseal
AEROCEL EVERSEAL INSULATION TAPE is specially designed for all types of climates. It insulates cold pipes for all kinds of air conditioners used in cars, homes, freezers and refrigerators. Helps stop condensation problems. Ideal for retarding heat gain in cold pipes and preventing heat loss in hot pipes.
EVERSEAL INSULATION TAPE is an effective sound dampening material, and it can also be used for gasketing purposes.
EVERSEAL INSULATION TAPE sticks to all kinds of dry metals. It seals tightly without drying. It is flexible and does not shrink or melt within the service temperature of -20°F (-29°C)to +200°F (+93°C).
Physical Properties
Composition: Polymer based material containing synthetic rubbers, asphalt and approximately 50% cork by volume. It has a grainy rubber-like consistency and contains no asbestos.
Solid Content: 99.8%
Color: Black
Odor: Only slight odor. Can be used without danger of contamination.
Thermal Conductivity: 0.60 BTU/hr/ft2 / °F/in at 75 degrees (0.08652 W/m.k)
Moisture/Vapor Transmission: 0.02 perms. (ASTM E-96 Procedure c)
Water Absorption: 0.01% by volume (ASTM D-1056)
Ozone Resistance: Good
Temperature Range: -20°F (-29°C) to +200°F (+93°C)
Specification
Standard Size: 1/8” thick, 2” wide and 30' long per roll (3 mm x 50 mm x 9.1 m) +/- 3%
Packing: One roll of Everseal cork tape wrapped in a plastic bag and packed into one individual box (12 boxes per master carton)
