EPDM Insulation
Aerocel® EPDM Tube and Sheet lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 3/8", 1/2", 3/4", 1" 1-1/4", 1-1/2" and 2" wall in popular I.D. sizes from 1/4" ID up to 16" ID. The closed-cell structure of Aerocel® Pipe lnsulation makes it the mostefficient elastomeric insulation.
Aerocel® EPDM is manufactured to consistently provide tested values - not theoretical calculations - on these key performance criteria for mechanical system insulation:
Thermal Conductivity: 0.245
Water Vapor transmission: 0.03
Fire Rating: Will not contribute significantly to fire (simulated end-use testing).
Aerocel® Pipe lnsulation in 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" thicknesses has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 "Surface Burning Characteristics of Building Materials."
Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified.
Key Features
- UV Resistant
- Low thermal conductivity
- Easy to install
- 25/50 rated through 2" wall
- Versatile for heating, AC, refrigeration and plumbing
- EPDM Rubber
- Moisture Resistant
Everseal
AEROCEL EVERSEAL INSULATION TAPE is specially designed for all types of climates. It insulates cold pipes for all kinds of air conditioners used in cars, homes, freezers and refrigerators. Helps stop condensation problems. Ideal for retarding heat gain in cold pipes and preventing heat loss in hot pipes.
EVERSEAL INSULATION TAPE is an effective sound dampening material, and it can also be used for gasketing purposes.
EVERSEAL INSULATION TAPE sticks to all kinds of dry metals. It seals tightly without drying. It is flexible and does not shrink or melt within the service temperature of -20°F (-29°C)to +200°F (+93°C).
Physical Properties
Composition: Polymer based material containing synthetic rubbers, asphalt and approximately 50% cork by volume. It has a grainy rubber-like consistency and contains no asbestos.
Solid Content: 99.8%
Color: Black
Odor: Only slight odor. Can be used without danger of contamination.
Thermal Conductivity: 0.60 BTU/hr/ft2 / °F/in at 75 degrees (0.08652 W/m.k)
Moisture/Vapor Transmission: 0.02 perms. (ASTM E-96 Procedure c)
Water Absorption: 0.01% by volume (ASTM D-1056)
Ozone Resistance: Good
Temperature Range: -20°F (-29°C) to +200°F (+93°C)
Specification
Standard Size: 1/8” thick, 2” wide and 30' long per roll (3 mm x 50 mm x 9.1 m) +/- 3%
Packing: One roll of Everseal cork tape wrapped in a plastic bag and packed into one individual box (12 boxes per master carton)
EPDM Continuous Tube
Aerocel® EPDM continuous tube insulation is a flexible, closed cell and light weight elastomeric material designed for insulating liquid cooling and heating lines. Aerocel® continuous tube is available in 3/8”, 1/2”, 3/4”, 1" and 1-1/2" thicknesses, and popular sizes up to 1 5/8” ID. The closed-cell structure of Aerocel® continuous tube pipe insulation makes it the most efficient elastomeric insulation. Aerocel® EPDM continuous tube insulation offers the only truly UV resistant HVAC piping insulation, requiring no additional protection from weathering degradation, because it is formulated using EPDM rubber.
Aerocel® EPDM continuous tube is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation:
Thermal Conductivity: 0.257 K Factor
Water Vapor transmission: >0.10
Fire Rating: Will not contribute significantly to fire (simulated end-use testing).
Aerocel® EPDM continuous tube pipe insulation, in 3/8”, 1/2, 3/4”, 1" and 1-1/2" thicknesses, has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 Surface Burning Characteristics of Building Materials.
Note: Numerical flammability ratings alone may not define performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified.
Key Features
- Best U/V resistance in its class
- Low thermal conductivity
- Easy to install
- 25/50 rated
- Versatile, for heating, AC, refrigeration, plumbing
Aerocel® continuous tube pipe insulation is used to retard heat gain and control condensation drip from cold water plumbing, chilled water, and refrigeration lines. It also efficiently reduces heat loss for hot water plumbing and liquid heating and dual temperature piping. The recommended temperature usage range for Aerocel® continuous tube pipe insulation is - 40° to 220° F.
Resistance to Moisture Vapor Flow
The closed-cell structure of Aerocel® continuous tube insulation effectively retards the flow of moisture vapor, and Aerocel® continuous tube is considered a low transmittance vapor retarder protection.
Application
Aerocel® continuous tube pipe insulation in unslit tubular form can be slipped onto piping before it is connected, or it can be slit lengthwise and snapped over piping already connected. Butt joints and seams are to be sealed with Aeroseal contact adhesive. Both surfaces to be joined must be coated with adhesive.
عایق برودتی و حرارتی Aeroflex از جنس epdm
| ||||||
Based on a closed-cell design, Aerocel® EPDM is the most efficient and versatile elastomeric insulation on the market. Aerocel® EPDM is designed for rugged applications including liquid cooling and heating pipes. And since EPDM is been used for decades as a roofing material, Aerocel® EPDM is inherently weather resistant – making it the perfect choice for harsh, outdoor applications. | ||||||
Key Features:
| ||||||
.jpg)
AEROFLEX
AEROFLEX یک عایق الاستومریک برودتی، حرارتی سلول بسته از جنس EPDM جهت عایق کاری سیستمهای حرارتی و برودتی مرکزی شامل لوله کشی آب سرد وگرم،مخازن، لوله های انتقال سیالات و گازهادر صنایع مختلف نظیر نفت، گاز،پتروشیمی، شیمیایی، خودرو سازی، نیروگاهی، کشتی سازی، هواپیماسازی، داروسازی و ساختمان به منظور ذخیره سازی انرژی و جلوگیری از ایجاد مشکلات ناشی از میعان میباشد.
AEROFLEX کاربرد وسیعی در سیستم H V A C &R در ساختمانها، کارخانجات و صنایع با استاندارد بین المللی بالا را داشته و دلیل آن خصوصیات برجسته زیر میباشد:
●مقاومت در برابر نفوذ بخار و رطوبت بدون نیاز به استفاده از موانع اضافی.
●ساختار سلولی کاملا بسته که نتیجه آن داشتن ضریب هدایت حرارتی (K-value) ثابت در زمان استفاده و همچنین جذب آن بسیار پایین و مقاومت بالا در برابر رطوبت می باشد.
●ساختار غیر قطبی با یک محور اشباع پلیمری که نتیجه آن مقاومت بالا در برابر اشعه ماورا بنفش (UV) شرایط جوی و عدم جذب رطوبت میباشد.
●فاقد مواد سمی، فیبر و ترکیبات نیتروژن دار
halogen, Nitrosamine, Dioxin, PVC, CFCs, (Non Formaldahyde
●ضریب انتقال حرارتی ثابت و پایین 0.034w/mk در دمای صفر درجه سانتیگراد.
●دامنه حرارتی در دماهای بین 200_ تا 125+ درجه سانتیگراد.
●بدون ایجاد حساسیت برای پوست و سیستم تنفسی.
●دارای استاندارد های بین المللی مقاومت در برابر دود و آتش گرفتگی.
●انعطاف پذیری و نصب آسان همراه با ظاهری تمیز و مرتب.
●جذب موثر صدا ( عایق صوتی 27db در ضخامت 20میلیمتر)
●بدون نیاز به پوشش های فلزی در لوله و مخازن.
●مقاوم در برابر رشد قارچها و حملات حشرات موذی.
●بهترین جایگزین پشم شیشه، پلی یورتان، پلی اتیلن و.....
●عدم اشتعال و مقاوم به آتش و حریق، خود خاموش شونده.
●وزن مخصوص بین 48 تا 96 کیلوگرم.
●پایین بودن غلظت دود در هنگام سوختن.
●مقاوم به مواد شیمیایی، اسیدهاو بازها.
●عدم تولید مواد سمی در هنگام آتش سوزی.
●دارای استاندارهای بین المللی:
ASTM_DNV_LLOYD'S_ANSI
BV_SGS_EMPA_IMO_BVQI
RUNE_LICM_GL_NKK
